CABLES TO GO 26982-Duplex 50/125 Multimode SC Loopback Tester

CABLES TO GO 26982-Duplex 50/125 Multimode SC Loopback Tester

salient features:


Provides a looped signal from source for testing

Features:

Fiber Loopback Cables provide you with a looped signal from the source device to hardware for testing purposes. This allows for a signal check for both the transmit and receiving functions.

* Connector: SC
* Cable Type: Multimode, 50/125
* Durability: Over 500 cycles (<= 0.2 dB change) * Reflectance: 20 dB min Specifications:

* Color: Orange
* Size: 3in
* Weight: .5lbs

Buy More Cables at worldofcables store Call Toll Free Now-1-877-230-2198

CABLES TO GO 37590-1m SC/ST Plenum-Rated Duplex 50/125 Multimode Fiber Patch Cable - Green

CABLES TO GO 37590-1m SC/ST Plenum-Rated Duplex 50/125 Multimode Fiber Patch Cable - Green

salient features:

1m ST/SC PLENUM DUPLEX 50/125 MULTIMODE FIBER PATCH CABLE - GREEN
For high speed multimode fiber applications. CMP rated for in-wall installations, colored for easy identification.

Product Features:

Get the performance you demand at a price that makes sense with Plenum-Rated 50/125 Multimode Fiber Patch Cords from World of Cables. They provide higher bandwidth and transmission rates and support longer distances with lower loss than 62.5/125 fiber, but are still cost effective. Perfect for use with today's narrower aperture components, they are fully compatible with multimode applications. 50/125 multimode patch cords from World of Cables are well-suited for protocols such as Ethernet, Fibre Channel, Infiniband, ATM, and Internet Protocol. These cables provide the fire protection required to run within walls and air plenums without the need for conduit.

These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are color-coded for easy identification in a congested patch field.

Features:

· Fully compatible with multimode fiber applications

· A Cost effective solution that provides lower loss and higher bandwidth supporting longer distances

· Perfect for use in Gigabit Ethernet applications

· CMP rated cable jacket provides the fire protection required to run these cables within walls and air plenums without the need for conduit

· Color-coded connector keys available in red, blue, green and black

· Lifetime warranty against defects of materials and workmanship

Specifications:

· Connectors: (2) ST to (2) SC

· Buffer material: PVC

· Buffer OD: 900 µm

· Jacket color: Green

· Attenuation @850 nm: 3.75 dB/km

· Attenuation @1310 nm: 1.5 dB/km

· Min. bandwidth @850 nm: 160 kHz/km

· Min. bandwidth @1310 nm: 500 kHz/km

· Maximum tensile load: 100 N/cm

· Loaded min. bend radius: 5 cm

· Unloaded min. bend radius: 3 cm

· Crush resistance: 750 N/cm

· Impact resistance: 1000 cycles

· Flex resistance: 5000 cycles

Product Specifications:

Warranty: Lifetime
Color: Green
Mfr: World of Cables
Weight: .05lbs

Buy More Cables at worldofcables store Call Toll Free Now-1-877-230-2198

CABLES TO GO 36408-8m ST/ST LSZH Duplex 62.5/125 Multimode Fiber Patch Cable

CABLES TO GO 36408-8m ST/ST LSZH Duplex 62.5/125 Multimode Fiber Patch Cable

salient features:

We offer high-quality 62.5/125 Low-Smoke Zero-Halogen (LSZH) Fiber Optic Patch Jumpers designed to meet or exceed industry specifications. These Fiber Patch Jumpers are perfect for Fast Ethernet, Fibre Channel, ATM and Gigabit Ethernet applications. Use to connect fiber optic equipment to fiber optic cross-connects, interconnects, and information outlets. Each cable is individually 100% optically inspected and tested for insertion loss and quality. LSZH jackets are composed of materials that lessen the emmissions of smoke and halogens when the cable is exposed to extreme temperatures. This reduces the amount of harmful toxic and corrosive gases that cabling made with plastic materials would otherwise emit into the air during combustion. This construction makes LSZH cables ideal for use where the protection of people and equipment from harmful corrosive gasses is absolutely critical. Custom lengths are available. Features: Low-Smoke Zero-Halogen jackets provide protection from toxic and corrosive gasses in poorly ventilated spaces and other areas where it is most critical. Fully compatible with multimode fiber applications. A Cost effective solution that provides lower loss and higher bandwidth supporting longer distances. Perfect for use in Gigabit Ethernet applications. Lifetime warranty against defects of materials and workmanship. Specifications: Connectors: (2) ST to (2) ST. Buffer OD: 900 µm. Jacket OD: 3.0 mm. Jacket color: Orange. Attenuation @850 nm: 3.75 dB/km. Attenuation @1310 nm: 1.5 dB/km. Min. bandwidth @850 nm: 160 kHz/km. Min. bandwidth @1310 nm: 500 kHz/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles.



Buy More Cables at worldofcables store Call Toll Free Now-1-877-230-2198

CABLES TO GO 37595-1m SC/ST Plenum-Rated Duplex 50/125 Multimode Fiber Patch Cable - Red

CABLES TO GO 37595-1m SC/ST Plenum-Rated Duplex 50/125 Multimode Fiber Patch Cable - Red



1m ST/SC PLENUM DUPLEX 50/125 MULTIMODE FIBER PATCH CABLE - RED
For high speed multimode fiber applications. CMP rated for in-wall installations, colored for easy identification.

Product Features:

Get the performance you demand at a price that makes sense with Plenum-Rated 50/125 Multimode Fiber Patch Cords from World of Cables. They provide higher bandwidth and transmission rates and support longer distances with lower loss than 62.5/125 fiber, but are still cost effective. Perfect for use with today's narrower aperture components, they are fully compatible with multimode applications. 50/125 multimode patch cords from World of Cables are well-suited for protocols such as Ethernet, Fibre Channel, Infiniband, ATM, and Internet Protocol. These cables provide the fire protection required to run within walls and air plenums without the need for conduit.

These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are color-coded for easy identification in a congested patch field.

Features:

· Fully compatible with multimode fiber applications

· A Cost effective solution that provides lower loss and higher bandwidth supporting longer distances

· Perfect for use in Gigabit Ethernet applications

· CMP rated cable jacket provides the fire protection required to run these cables within walls and air plenums without the need for conduit

· Color-coded connector keys available in red, blue, green and black

· Lifetime warranty against defects of materials and workmanship

Specifications:

· Connectors: (2) ST to (2) SC

· Buffer material: PVC

· Buffer OD: 900 µm

· Jacket color: Red

· Attenuation @850 nm: 3.75 dB/km

· Attenuation @1310 nm: 1.5 dB/km

· Min. bandwidth @850 nm: 160 kHz/km

· Min. bandwidth @1310 nm: 500 kHz/km

· Maximum tensile load: 100 N/cm

· Loaded min. bend radius: 5 cm

· Unloaded min. bend radius: 3 cm

· Crush resistance: 750 N/cm

· Impact resistance: 1000 cycles

· Flex resistance: 5000 cycles

Product Specifications:
Warranty: Lifetime
Color: Red
Mfr: World of Cables
Weight: .05lbs

Buy More Cables at worldofcables store Call Toll Free Now-1-877-230-2198

CABLES TO GO 09181-5m FDDI/ST Duplex 62.5/125 Multimode Fiber Patch Cable - Orange

CABLES TO GO 09181-5m FDDI/ST Duplex 62.5/125 Multimode Fiber Patch Cable - Orange

Product Description
62.5/125 micron FDDI/ST multimode duplex fiber patch cable

Features:
A high-quality fiber optic patch cable designed with FDDI to ST termination, and is perfect for ethernet, multimedia, or communication applications. Now, you can make your ST equipment FDDI compatible. FDDI handles network speeds of up to 100 Mbps and can be used in all multimode applications. The patented Injection Molding Process gives each connection greater durability in resisting pulls, strains and impacts from cabling installs. Each cable is 100% optically inspected and tested for insertion loss before you receive it. The pull-proof jacket design surrounds the popular 62.5/125 multimode fiber. Manufactured by Fiber-Conn Assemblies®, the experts in the fiber optic industry.

Connector: FDDI to ST
Fiber Size: 62.5/125 micron
Type: Multimode; Duplex
Features:
Make your ST equipment FDDI compatible
Color-coded connector keys
100% optically inspected and tested for insertion loss
Molded form construction
Immune to electrical interference
Application: Gigabit Ethernet, FDDI, Multimedia, ATM, or any application that requires high-speed data transfer
Specifications:

Color: Orange
Size: 5m
Weight: 0.5lbs

Buy More Cables at worldofcables.com